Secret Codes Of
Nokia Mobiles:
Below we present
secret codes of nokia mobile phones which are very useful for people who unlock
phones and for amateurs of this topic. These special key sequences entered
fromkeyboard of phone allow you to get some important information like IMEI
number, release date, software version and much more. You can also choose
default language, activatenetmonitor ect.
1610/1630
*#170602112302#
(software version)
1610/1611
IMEI number: -*#
0 6 #
Software version:
-* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: -
# 9 2 7 0 2 6 8 9 #
2110
*#9999# (software
version)
2110i/2110e
*#170602112302#
or (depends on model)*#682371158412125# (software version)
NOKIA3110
*#06# -IMEI
*#3110# -Software
version
##002# - allows
to turn off voice mail.
*#7780# - restore
factory settings
*#746025625#(or
*#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped
(SIM-Clock-stop is akind of standby mode which saces battery)
*#92702689# (or
*#war0anty#) -"warranty code:"- you have to enter one of the
following codes:
6232 (OK)displays
month and year of production date (ie "0198")
7332 (OK) -
displays date of last repair - if there is (ie. "DATE NOT SAVED")
7832 (OK) -
displays date of purchase - if there is (ie. "DATE NOT SAVED")
9268 (OK)
-displays serial number
37832 (OK) -sets
purchase date in format MMYY (MM - month, YY - year)- attention: you can set it
only once, so beware !
87267
(OK)-displays message "Confirm Transfer?" - meaning is unknown (?)
* # 9 2 7 0 2 6 8
9 # -Simlock info
*#31# (call) -sets
if your phone no. will be hidden or not (works only in some networks)
*#76# (call)
-sets if target phone number when you call should be displayed (works only in
some networks)
*#77# (call)
-(work s only in some networks)
*#33/35# (call
-displays message "Service not active".
**31# (call)
-your no. will not be showed to others when you make a call
3210
*#06# -IMEI
*#0000# -software
version
*#92702689# (or
*#war0anty#)- enters service mode.
*3370# -Turns on
sound encoding system - Enhanced Full Rate.
#3370# -Turns off
sound encoding system Enhanced Full Rate .
*4720# -Turns on
battery save mode - saves about 30 % of energy.
#4720# -Turns off
battery save mode.
xx# -Replace xx
with desired phonebook entry - press # and you will see it on display.
51XX
*#06# -IMEI
*#0000# -
Software version
*#92702689#( or
*#war0anty#) Enter service mode.
*3370# -Turns on
sound encoding system - Enhanced Full Rate.
#3370# -Turns off
sound encoding system - Enhanced Full Rate.
*4720# -Turns on
battery save mode - saves about 30 % of energy.
#4720# -Turns off
battery save mode.
#pw+1234567890+1
-provider lock status
#pw+1234567890+2
-Network lock status
#pw+1234567890+3
-Provider lock status
#pw+1234567890+4
- SimCard lock status
NOKIA 61XX
*#06# -IMEI
*#0000# ;-*#99
99# (Nokia 6130)
*#92702689# (or
*#war0anty#) Software versionEnter service mode.
*3370# -Turns on
sound encoding system - Enhanced Full Rate.
#3370# -Turns off
sound encoding system - Enhanced Full Rate.
*4720# -Turns on
battery save mode - saves about 30 % of energy.
#4720# -Turns off
battery save mode.
NOKIA8810
*#06# - IMEI
*#0000# -Software
version
*#92702689# (or
*#war0anty#) Enter service mode.
*3370# -Turns on
sound encoding system - Enhanced Full Rate.
#3370# -Turns off
sound encoding system - Enhanced Full Rate.
*4720# -Turns on
battery save mode - saves about 30 % of energy
#4720# -Turns off
battery save mode - saves about 30 % of energy
NOKIA99OO
*#06# -IMEI
*#682371158412125#
-Software version
*#3283# -Displays
week and year of manufacture, ie. 1497 means 14th week of 1997.
NOKIA 911O
*#06# IMEI
*#0000# SOFTWARE
VERSION
*3370# Turns on
sound encoding system - Enhanced Full Rate.
#3370# Turns off
sound encoding system - Enhanced Full Rate.
*4720# Turns on
battery save mode - saves about 30 % of energy.
#4720# Turns off
battery save mode.
NOKIA 81XX
*#06# IMEI
*#8110# Software
version
xx# Replace xx
with desired phonebook entry - press # and you will see it on display
*#92702689# (or
*#warOanty#)
"Warranty
code:" - you have to enter one of the following codes:
9268 (OK)
displays IMEI (International Mobile Equipment Identification)
6232 (OK)
displays date of manufacture in format MMYY (MM - month, RR - year)
7832 (OK)
displays date of purchase
7332 (OK)
displays date of repair or upgrade
37832 (OK) sets
date of purchase in format MMYY (MM - month, RR - year) - attention: you can
set it only once, so beware !!!
87267 (OK)
transmits user data/move data do service PC
Siemens Mobile
Secret Codes:
C25:
SP unlock
*#0003*(secret code 8 digits)#
*#0606# shows you
Secret Code, but only without SIM Card.
*#06# for
checking the IMEI (International Mobile Equipment Identity)
Resets language
to automatic selection : * # 0000 # then Green button
Pin Out
(electrical connections)
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Languages:
*#0000#+green
phone - choose automaticaly
*#0001#+green
phone - English
*#0030#+green
phone - Greek
*#0031#+green
phone - Netherlands
*#0032#+green
phone - French
*#0034#+green
phone - Spanish
*#0039#+green
phone - Italian
*#0049#+green
phone - German
*#0090#+green
phone - Turkish
How to change
PIN:
**04*old PIN*new
PIN*new PIN#
How to check
simlock status
*#0606# and then
press left soft-key, you will see strange characters, then text ("brak
blokad"). If you see for example 260-02, it means the phone is locked to
Era GSM. In older models you can use *#06# and see the same information after
clicking on left key (you will see IMEI and software version).
S4:
Monitor Mode -
how to activate:
Press left
soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press
left soft-key and in order 7684666 and red phone at the end (monitor mode has
been activated). To read information from Monitor Mode - press left soft-key,
then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch
off the phone. You must activate it again if you want.
How to see date
of software:
Press left
soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then
press twice left soft-key, 98, left soft-key, 7684666, red phone (activates
Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98,
left soft-key, 7684666, hang up (red phone) >abck to "normal" and
then left soft-key, 56.
S6, S8:
If you add to
phonebook under 'own phone number' +12022243121 with namez (for example MMI),
then you will see something smile.gif
S10, E10:
In phonebook
enter +12022243121 as your own phone no. You will see a picture with sun, two
palms and greetings.
S15e:
Monitor Mode:
Code:
*#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone
button until it code disapears.
Menu 3.3.4 Choose
frequency.
Menu 3.3.4.1
Automaticaly.
Menu 3.3.4.2
Choose GSM-900
Menu 3.3.4.3
Choose GSM-1800
Menu 10.1 MS info
Menu 10.2 Soft
date
Menu 10.2.1
Software version.
Menu 10.2.2
EEProm version.
Menu 10.3 Tst and
product info.
Menu 10.3.1
Handware data.
Menu 10.3.2 Date
of manufacture
Menu 10.3.3
Service date
Menu 10.3.4 Date
of repair.
S25:
Enhanced Full
Rate
*#3370# turns on
#3370# turns off
Haft Rate Mode
*#4720# turns on
#4720# turns off.
Languages:
*#0000#+green
phone - choose automaticaly
*#0001#+green
phone - English
*#0030#+green
phone - Greek
*#0031#+green
phone - Netherlands
*#0032#+green
phone - French
*#0034#+green
phone - Spanish
*#0039#+green
phone - Italian
*#0049#+green
phone - German
*#0090#+green
phone - Turkish
How to change
PIN2?
**04*old PIN2*new
PIN2*new PIN2#
What is my
software version?
Menu 8-8-2 press
left-softkey when you see IMEI number, or *#06# and then green phone button and
then press left soft-key.
How to extend
battery life:
IrDA - turn on
only when you need.
Turn off
automatic network search (6-3)Turn off Vibration alarm.
SP unlock
*#0003*(secret code 8 digits)#
*#0606# shows you
Secret Code, but only without SIM Card.
*#06# for
checking the IMEI (International Mobile Equipment Identity)
Resets language
to automatic selection : * # 0000 # then Green button
S25, M35, S35,
C35
SP unlock
*#0003*(secret code 8 digits)#
*#0606# shows you
Secret Code, but only without SIM Card.
*#06# for
checking the IMEI (International Mobile Equipment Identity)
Resets language
to automatic selection : * # 0000 # then Green button
Motorola Codes:
Motorola 920
---------------
Press menu and
type one of these numbers and press OK:
11 = Status
Review
13 = Available
Networks
14 = Preferred
Networks
22 = Select
Keypad Tones
25 = Require SIM
Card PIN
26 = Language
Selection
32 = Repetitive
Timer
33 = Single Alert
Timer
34 = Set IN-Call
Display
35 = Show Call
Timers
36 = Show Call
Charges
37 = Call Charge
Settings
38 = Reset All
Timers
43 = Reset All
Timers
45 = Show Last
Call
46 = Total For
All Calls
47 = Lifetime
Timer
51 = Change
Unlock Code
52 = Master Reset
53 = Master Clear
(Warning!! May result in deleting the Message Editor!!!)
54 = New Security
Code
55 = Automatic
Lock
63 = Battery
Saving Mode
Free call tip
1 Enter the phone
number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally
press the button for power off.
You should now be
able to talk without being billed.
The 54# Tip:
Type 1#,
2#........54# on the keypad (when you're not in the menu) to get the phone
number used for with this key when speed dialing.
Motorola 930
--------------
Press menu and
type one of these numbers and press OK:
11 = Status
Review
13 = Available
Networks
14 = Preferred
Networks
22 = Select
Keypad Tones
25 = Require SIM
Card PIN
26 = Language
Selection
32 = Repetitive
Timer
33 = Single Alert
Timer
34 = Set IN-Call
Display
35 = Show Call
Timers
36 = Show Call
Charges
37 = Call Charge
Settings
38 = Reset All
Timers
43 = Reset All
Timers
45 = Show Last
Call
46 = Total For
All Calls
47 = Lifetime
Timer
51 = Change
Unlock Code
52 = Master Reset
53 = Master Clear
(Warning!! May result in deleting the Message Editor!!!)
54 = New Security
Code
55 = Automatic
Lock
63 = Battery
Saving Mode
Free call tip
1 Enter the phone
number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally
press the button for power off.
You should now be
able to talk without being billed.
Motorola 930
The 54# Tip:
Type 1#,
2#........54# on the keypad (when you're not in the menu) to get the phone
number used for with this key when speed dialing.
Motorola 6200
--------------
(Note: pause
means the * key held in until box appears)
To activate RBS
type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause]
[ok]
You now have to
press the [MENU] and scroll to the 'Eng
Field Options'
function with the keys, and enable it.
De-activate RBS
To de-activate
RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause]
[ok]
This only works
with some versions of software.
These countries
has been reported working:
UK (Orange)
AU
What's the use of
RBS:
Get Distance From
Base Station - Place a call, when it
is answered,
press [MENU] until 'Eng Field Option' is
displayed, press
[OK], select 'Active Cell', press [OK],
press [MENU]
until 'Time Adv xxx' appears, where xxx is
a number.
Multiply this number by 550, and the result is
the distance from
the RBS (Radio Base Station), in
meters.
Get Signal
Quality - press [MENU] until 'Eng Field
Option' is
displayed, press [OK], select 'Active Cell',
press [OK], press
[MENU] until 'C1' appears. This is the
signal quality.
If it becomes negative for longer than 5
seconds, a new
cell is selected.
Pin Outs
Numbered left to
right, keypad up, battery down
1. Audio Ground
2. V+
3. True data (TD)
(input)
4. Downlink -
Complimentary data (CD) (input)
5. Uplink -
Return data (RD) (output)
6. GND
7. Audio Out -
on/off
8. Audio In
9. Manual Test -
???
10. Battery
Feedback
11. Antenna
connector
Motorola 7500
-------------
(Note: pause
means the * key held in until box appears)
To activate RBS
type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause]
[ok]
You now have to
press the [MENU] and scroll to the 'Eng
Field Options'
function with the keys, and enable it.
De-activate RBS
To de-activate
RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause]
[ok]
This only works
with some versions of software.
These countries
has been reported working:
IT (model: F16
HW: 5.2 SW: 2.1)
What's the use of
RBS:
Get Distance From
Base Station - Place a call, when it
is answered, press
[MENU] until 'Eng Field Option' is
displayed, press
[OK], select 'Active Cell', press [OK],
press [MENU]
until 'Time Adv xxx' appears, where xxx is
a number.
Multiply this number by 550, and the result is
the distance from
the RBS (Radio Base Station), in
meters.
Get Signal
Quality - press [MENU] until 'Eng Field
Option' is
displayed, press [OK], select 'Active Cell',
press [OK], press
[MENU] until 'C1' appears. This is the
signal quality.
If it becomes negative for longer than 5
seconds, a new
cell is selected.
Pin Outs
Numbered right to
left, keypad up, battery down looking
1. Gnd
2. Pos
3. True data (TD)
(input)
4. Complimentary
data (CD) (input)
5. Return data
(RD) (output)
6. Audio gnd
7. Audio out
8. Audioin
Motorola 8200
--------------
(Note: pause
means the * key held in until box appears)
To activate RBS
type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause]
[ok]
You now have to
press the [MENU] and scroll to the 'Eng
Field Options'
function with the keys, and enable it.
De-activate RBS
To de-activate
RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause]
[ok]
This only works
with some versions of software.
These countries
has been reported working:
ES, AU, NL, BE
What's the use of
RBS:
Get Distance From
Base Station - Place a call, when it
is answered,
press [MENU] until 'Eng Field Option' is
displayed, press
[OK], select 'Active Cell', press [OK],
press [MENU]
until 'Time Adv xxx' appears, where xxx is
a number.
Multiply this number by 550, and the result is
the distance from
the RBS (Radio Base Station), in
meters.
Get Signal
Quality - press [MENU] until 'Eng Field
Option' is
displayed, press [OK], select 'Active Cell',
press [OK], press
[MENU] until 'C1' appears. This is the
signal quality.
If it becomes negative for longer than 5
seconds, a new
cell is selected.
Pin Outs
Numbered right to
left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD)
(input)
4. Downlink -
Complimentary data (CD) (input)
5. Uplink -
Return data (RD) (output)
6. GND
7. Audio Out -
on/off
8. Audio In
9. Manual Test -
???
10. Battery
Feedback
11. Antenna
connector
Motorola 8400
-------------
(Note: pause
means the * key held in until box appears)
To activate RBS
type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause]
[ok]
You now have to
press the [MENU] and scroll to the 'Eng
Field Options'
function with the keys, and enable it.
De-activate RBS
To de-activate
RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause]
[ok]
This only works
with some versions of software.
These countries
has been reported working:
ES, AU, NL, BE
What's the use of
RBS:
Get Distance From
Base Station - Place a call, when it
is answered,
press [MENU] until 'Eng Field Option' is
displayed, press
[OK], select 'Active Cell', press [OK],
press [MENU]
until 'Time Adv xxx' appears, where xxx is
a number.
Multiply this number by 550, and the result is
the distance from
the RBS (Radio Base Station), in
meters.
Get Signal
Quality - press [MENU] until 'Eng Field
Option' is
displayed, press [OK], select 'Active Cell',
press [OK], press
[MENU] until 'C1' appears. This is the
signal quality.
If it becomes negative for longer than 5
seconds, a new
cell is selected.
Pin Outs
Numbered right to
left, keypad up, battery down looking
1. Audio Ground
2. V+
3. True data (TD)
(input)
4. Downlink -
Complimentary data (CD) (input)
5. Uplink -
Return data (RD) (output)
6. GND
7. Audio Out -
on/off
8. Audio In
9. Manual Test -
???
10. Battery
Feedback
11. Antenna
connector
Motorola 8700
--------------
*#06# for
checking the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause
means the * key held in until box appears)
To activate RBS
type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause]
[ok]
You now have to
press the [MENU] and scroll to the 'Eng
Field Options'
function with the keys, and enable it.
De-activate RBS
To de-activate
RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause]
[ok]
This only works
with some versions of software.
These countries
has been reported working:
AU, IT, SG, DE,
ES, ZA
What's the use of
RBS:
Get Distance From
Base Station - Place a call, when it
is answered,
press [MENU] until 'Eng Field Option' is
displayed, press
[OK], select 'Active Cell', press [OK],
press [MENU]
until 'Time Adv xxx' appears, where xxx is
a number.
Multiply this number by 550, and the result is
the distance from
the RBS (Radio Base Station), in
meters.
Get Signal
Quality - press [MENU] until 'Eng Field
Option' is
displayed, press [OK], select 'Active Cell',
press [OK], press
[MENU] until 'C1' appears. This is the
signal quality.
If it becomes negative for longer than 5
seconds, a new
cell is selected.
Motorola CD 160
---------------
Press menu and
type one of these numbers and press OK:
11 = Status
Review
13 = Available
Networks
14 = Preferred
Networks
22 = Select
Keypad Tones
25 = Require SIM
Card PIN
26 = Language
Selection
32 = Repetitive
Timer
33 = Single Alert
Timer
34 = Set IN-Call
Display
35 = Show Call
Timers
36 = Show Call
Charges
37 = Call Charge
Settings
38 = Reset All
Timers
43 = Reset All
Timers
45 = Show Last
Call
46 = Total For
All Calls
47 = Lifetime
Timer
51 = Change
Unlock Code
52 = Master Reset
53 = Master Clear
(Warning!! May result in deleting the Message Editor!!!)
54 = New Security
Code
55 = Automatic
Lock
63 = Battery
Saving Mode
Free call tip
1 Enter the phone
number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally
press the button for power off.
You should now be
able to talk without being billed.
Motorola CD 520
----------------
Press menu and type
one of these numbers and press OK:
11 = Status
Review
13 = Available
Networks
14 = Preferred
Networks
22 = Select
Keypad Tones
25 = Require SIM
Card PIN
26 = Language
Selection
32 = Repetitive
Timer
33 = Single Alert
Timer
34 = Set IN-Call
Display
35 = Show Call
Timers
36 = Show Call
Charges
37 = Call Charge
Settings
38 = Reset All
Timers
43 = Reset All
Timers
45 = Show Last
Call
46 = Total For
All Calls
47 = Lifetime
Timer
51 = Change
Unlock Code
52 = Master Reset
53 = Master Clear
(Warning!! May result in deleting the Message Editor!!!)
54 = New Security
Code
55 = Automatic
Lock
63 = Battery
Saving Mode
Free call tip
1 Enter the phone
number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally
press the button for power off.
You should now be
able to talk without being billed.
Motorola d460
--------------
#06# for checking
the IMEI (International Mobile Equipment Identity)
Activate RBS
(Note: pause
means the * key held in until box appears)
To activate RBS
type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause]
[ok]
You now have to
press the [MENU] and scroll to the 'Eng
Field Options'
function with the keys, and enable it.
De-activate RBS
To de-activate
RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause]
[ok]
This only works
with some versions of software.
What's the use of
RBS:
Get Distance From
Base Station - Place a call, when it
is answered,
press [MENU] until 'Eng Field Option' is
displayed, press
[OK], select 'Active Cell', press [OK],
press [MENU]
until 'Time Adv xxx' appears, where xxx is
a number.
Multiply this number by 550, and the result is
the distance from
the RBS (Radio Base Station), in
meters.
Get Signal
Quality - press [MENU] until 'Eng Field
Option' is
displayed, press [OK], select 'Active Cell',
press [OK], press
[MENU] until 'C1' appears. This is the
signal quality.
If it becomes negative for longer than 5
seconds, a new
cell is selected.
Motorola V3688
---------------
#06# for checking
the IMEI (International Mobile Equipment Identity)
Enhanced Full
Rate Codec (EFR):
To Enable EFR
press [][][] 119 [] 1 [] OK.
To Disable EFR
press [][][] 119 [] 0 [] OK
NOTE: Nothing
appears on Screen.
Ericsson Mobile
Secret Codes:
T10
*#06# for
checking the IMEI (International Mobile Equipment Identity)
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
Shortcut for Last
Dialed call menu
If you for some
reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key
you can use the following key
stroke instead:
First '0' then '#'.
Access menu
without Sim card
To access to the
menu in your phone without having a card inside do the following: type
**04*0000*0000*0000# When display say "Wrong Pin" press NO and you
have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock
On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock
On? menu and you´ll have to take your battery out to turn the phone on again.
And this will not care about Phone lock!
A way to (un)lock
your cell phone on to the network(subset):
1. Press
<**<
2. Then on the
display appear and give you two choices: Lock to Network ? and Lock to Network
subset? (Use arrow keys to select)
3. Enter the NCK
number (code is provided by the SP)
4. You have 5
attemps to do this
5. Then your cell
phone will work 'only' with the network
Warning: The
Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM
card. Once the cell phone is locked to a specific operator, if one inserts a
SIM card from a different operator the phone will refuse to accept it! The cell
phone will however accept another SIM card from the same operator. To
activate/deactivate this lock one needs a special secret code that is not
available to the end user. Your phone can be locked to a service provider
FOREVER by doing this! If an invalid code is entered all five times, the menu
will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock
Menu will result in the response "Not allowed"! However the NCK/NSCK
lock can be recover through a direct clearing in the EEPROM.
Message Report
When you writing
a message, place at the start of it the code *0# and continue with your
message. It's job is like nokias report. It gives you information about the
sended message.
T18
*#06# for checking
the IMEI (International Mobile Equipment Identity) Information you get from the
IMEI:
XXXXXX XX XXXXXX
X
TAC FAC SNR SP
TAC = Type
approval code
FAC = Final
assembly code
SNR = Serial
number
SP = Spare
To access
SIM-Locking menu of your phone, press: < * [CLR] <
Be careful or you
may lock your phone.
Message Report
When you writing
a message, place at the start of it the code *0# and continue with your
message. It's job is like nokias report. It gives you information about the
sended message.
T28
*#06# for
checking the IMEI (International Mobile Equipment Identity)
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.
The Service
Provider (SP) Lock
The Service
Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card.
Once the cell phone is locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to accept it! The cell phone
will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here is how to
activate the menu:
<**< Lock
to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your
phone can be locked to a service provider FOREVER by doing this! If an invalid
code is entered all five times, the menu will exit and be deactivated! Any
further attempt to activate the NCK/NSCK lock Menu will result in the response
"Not allowed"! However the NCK/NSCK lock can be recover through a
direct clearing in the EEPROM.
Shortcut for Last
Dialed call menu
If you for some
reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key
you can use the following key
stroke instead:
First '0' then '#'.
Message Report
When you are
writing a message, place at the start of it the code *0# and continue with your
message. It's job is like nokias report. It gives you information about the
sended message.
388
*#06# for
checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset
the phones menu-language to English.
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language.(298 entries)
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.(160 entries?)
The Service
Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card.
Once the cell phone is locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to accept it! The cell phone
will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user. (not even to you... or is it ? in case please let me
know!)
<**< Lock
to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your
phone can be locked to a service provider FOREVER by doing this! If an invalid
code is entered all five times,the menu will exit and be deactivated! Any
further attempt to activate the NCK/NSCK lock Menu will result in the response
"Not allowed"! However the NCK/NSCK lock can be recover through a
direct clearing in the EEPROM.
Shortcut for Last
Dialed call menu...
If you for some
reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key
you can use the following key
stroke instead:
First '0' then '#'.
Access menu
without Sim card ...
To access to the
menu in your phone without having a card inside do the following: type
**04*0000*0000*0000# When display say "Wrong Pin" press NO and you
have access to the all menus: Info, Access, Settings, Calculator, Clock,
Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may
stop at Keylock On? menu and you´ll have to take your battery out to turn the
phone on again.
GA628
*#06# for
checking the IMEI (International Mobile Equipment Identity)
*#0000# to reset
the phones menu-language to English.
*#103# then YES
Time and date will be shown.
>*<<*<*
for checking the firmware revision information (software release)
>*<<*<*>
1-row text strings. if pressing yes you can check the phones text programming
in currently selected language.(298 entries)
>*<<*<*>>
n-row text strings. if pressing yes you can check the phones text programming
in currently selected language.(160 entries?)
The Service
Provider (SP) Lock
The Service
Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card.
Once the cell phone is locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to accept it! The cell phone
will however accept another SIM card from the same operator.
To
activate/deactivate this lock one needs a special secret code that is not
available to the end user.
Here is how to
activate the menu:
<**< Lock
to Network? if pressing yes you have 5 attempts to enter NCK.
<**<<
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.
Warning: Your
phone can be locked to a service provider FOREVER by doing this! If an invalid
code is entered all five times,the menu will exit and be deactivated! Any
further attempt to activate the NCK/NSCK lock Menu will result in the response
"Not allowed"! However the NCK/NSCK lock can be recover through a
direct clearing in the EEPROM.
Shortcut for Last
Dialed call menu
If you for some
reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key
you can use the following key
stroke instead:
First '0' then '#'.
Bat. level
indicator when turned OFF
When the phone is
turned off and the phone is not changing - the bat. level can be seen for a
short period of time by pressing the 'NO' key quick once (it has to be quick!) and
then wait for about 2 sec. The bat. level will now be shown in the display at
its normal position.
Access menu
without Sim card
To access to the
menu in your phone without having a card inside do the following: type
**04*0000*0000*0000# When display say "Wrong Pin" press NO and you
have access to the all menus: Info, Access, Settings, Calculator, Clock,
Keylock On?,Mail, Phone book. NOTE if you try this on your phone may stop at
Keylock On? menu and you´ll have to take your battery out to turn the phone on
again.
Alarm Clock Menu
Go to MissedCall
Empty the list Press the -> key for a second or two The option Menu size
turns up Choose 'yes' and go from there.
An alarm clock
turned up too but it never rang. I think this was because there is no clock in
the phone.
Free phone calls
using the GA628
This trick has
only been reported working on PREPAID GSM CARDS and in some countries and with
some sw versions.
The prepaid GSM
SIM CARD is a kind of "SIM card" which only has a sertant amount of
credit on it (like a normal phonebox telecard)... if it can be traced? - we
don't know...
Well..here's the
trick you dial the no. normally and press YES. While "connecting" is
shown on the screen, the following procedure should be carried out: Press CLR
then 0 then # and then NO (twice) so as to switch OFF the phone. You can then
still speak on the phone while it is switched off but the SIM card does not
record your calls which will lead to FREE phone calls in some countries.. we
hope!!
Another variant
of the code
Make a Call,
while the phone says Connecting type 083# (the position 83 must be empty! ),
when phone says Pos Emtpy, press the NO key and turn off the phone.
No comments:
Post a Comment